Easy To Maintain Rubber Rotor Oil Sludge Recovery Lobe Pumps
Rotary lobe pumps
Accuvon rotary lobe pump has a strong hybrid transport capacity of
gas and liquid, which can empty the products in the pipeline. In
addition the pump also allows short -time drying, has stable
unloading, simple process, and high efficiency. It is currently
widely used by large chemical companies such as Sinopec and
PetroChina.
Oil products must ensure no sparks, electrostatic.and leakage
during the transportation.Accuvon pump is equipped with brass rotor
and FKM rotor through anti-static processing to ensure the safety
of transporting flammable and explosive and easy to corrode
products.
Operating Principles:
When pump lobes rotates, the space between 2 lobes increase, it
will create a partial vacuum to transfer fluid into pump chamber,
The pump shaft keeps turning, lobes will continue to create space
to delivery fluid, the tolerance between lobes and chamber ensure
the space is suitable to filled. When the pump chamber is fully
filled, the fluid will be transfer to outlet.
Specifications:
| ACCUVON | rate of flow
l/rev | flow
(m³/h) | pressure
(Mpa) | speed
rpm | Flange diameter
DN mm | power
Kw |
| AC25 | 0.196 | 0.1-7 | 0-1.2 | 10-600 | DN25 | 0.75-5.5 |
| AC50 | 0.392 | 0.2-14 | 0-1.0 | 10-600 | DN50 | 1.1-5.5 |
| AC75 | 0.588 | 0.3-21 | 0-0.6 | 10-600 | DN50 | 1.1-5.5 |
| AP80 | 1.125 | 0.6-400 | 0-1.8 | 10-600 | DN80 | 3-22 |
| AP100 | 1.875 | 1.1-66 | 0-1.4 | 10-600 | DN100 | 3-22 |
| AP120 | 2.864 | 1.7-103 | 0-1.0 | 10-600 | DN100 | 3-22 |
| AP140 | 3.714 | 2.2-133 | 0-0.6 | 10-600 | DN125 | 7.5-22 |
| AF125 | 4.566 | 2.7-164 | 0-1.6 | 10-600 | DN125 | 11-55 |
| AF150 | 6.828 | 4-246 | 0-1.2 | 10-600 | DN150 | 11-55 |
| AF200 | 9.456 | 5.5-340 | 0-0.8 | 10-600 | DN200 | 11-55 |
| AX250 | 12.5 | 7.5-487 | 0-2.5 | 10-650 | DN250 | 22-315 |
| AX300 | 25 | 15-975 | 0-1.0 | 10-650 | DN300 | 30-315 |
| AX350 | 37.5 | 22.5-1463 | 0-0.6 | 10-650 | DN350 | 45-315 |
| AX450 | 50 | 30-1950 | 0-0.4 | 10-650 | DN450 | 55-315 |
| AX350D | 75 | 45-2926 | 0-0.6 | 10-650 | DN350*2 | 90-450 |
| AX450D | 100 | 60-3900 | 0-0.4 | 10-650 | DN450*2 | 110-600 |
Construction
1. The quick-release cover
Access to all wetted parts by simply loosening four ring nuts –
maintenance without removal of pipe or drive systems.
2. The rotors
Large selection of high-quality rotors for almost pulsation-free
pumping of the medium.
3. The casing protection
Depending on its size, the pump is available with and completely
without protection plates and liners. When pumping abrasive media
containing solids, the protection plates and liners protect the
pump casing from wear and can be replaced in a matter of minutes.
4. The intermediate chamber and shaft seal
The large-volume quench chamber is oil-filled and ensures the
highest degree of safety. The ideal mechanical seal is selected
depending on the medium.
5. The carrier and timing gear
The high-quality and maintenance free carrier and timing gear
guarantees a smooth and even operation of the rotors. The result is
a long service life of the pump.
Advantages
+ 16 pump sizes with flow rates of 1–3200 m³/h
+ With and without casing protection plates and liners
+ Pumping in slurp operation
+ Resistant to solids and self-priming
+ Ease of maintenance thanks to MIP
+ Different drive options
+ Short-term dry-run capability
Testing Photo
