Solid Particle Resistant Efficiency Rotary Lobe Pumps For Waste
Water Treatment
Rotary lobe pumps
Our Rotary lobe pump is very suitable for use in Waste water
treatment ,The cost-effectiveness of a waste water treatment plant
depends mainly on the efficiency of its components. Each one of our
components plays a part in ensuring efficiency. And when individual
machines are combined, new possibilities for cost-effective
operation
emerge. In this way, we can offer reliable products and efficient
solutions for pump and maceration technology – tailored to your
specific needs.
Function
Due to the unique separation between the pump and gear chamber, the
ACCUVON lobe pump offer you maximum operational safety. This means
that no penetration of the medium into the bearing housing is
possible in the case of a product leak. In addition, the innovative
design allows you to inspect the mechanical seals visually. This
enables you to react at an early stage if necessary. Thanks to the
function of the rotary lobe pumps, you can also safely convey both
low and high viscosity media. Due to the significant free ball
passage and the low speeds, the positive displacement pumps are
insensitive to blockages, clogging and foreign bodies. Varying
solids contents have just as little influence on the flow rate as
pressure changes. This enables continuous and powerful pumping.
Specifications:
| ACCUVON | rate of flow
l/rev | flow
(m³/h) | pressure
(Mpa) | speed
rpm | Flange diameter
DN mm | power
Kw |
| AC25 | 0.196 | 0.1-7 | 0-1.2 | 10-600 | DN25 | 0.75-5.5 |
| AC50 | 0.392 | 0.2-14 | 0-1.0 | 10-600 | DN50 | 1.1-5.5 |
| AC75 | 0.588 | 0.3-21 | 0-0.6 | 10-600 | DN50 | 1.1-5.5 |
| AP80 | 1.125 | 0.6-400 | 0-1.8 | 10-600 | DN80 | 3-22 |
| AP100 | 1.875 | 1.1-66 | 0-1.4 | 10-600 | DN100 | 3-22 |
| AP120 | 2.864 | 1.7-103 | 0-1.0 | 10-600 | DN100 | 3-22 |
| AP140 | 3.714 | 2.2-133 | 0-0.6 | 10-600 | DN125 | 7.5-22 |
| AF125 | 4.566 | 2.7-164 | 0-1.6 | 10-600 | DN125 | 11-55 |
| AF150 | 6.828 | 4-246 | 0-1.2 | 10-600 | DN150 | 11-55 |
| AF200 | 9.456 | 5.5-340 | 0-0.8 | 10-600 | DN200 | 11-55 |
| AX250 | 12.5 | 7.5-487 | 0-2.5 | 10-650 | DN250 | 22-315 |
| AX300 | 25 | 15-975 | 0-1.0 | 10-650 | DN300 | 30-315 |
| AX350 | 37.5 | 22.5-1463 | 0-0.6 | 10-650 | DN350 | 45-315 |
| AX450 | 50 | 30-1950 | 0-0.4 | 10-650 | DN450 | 55-315 |
| AX350D | 75 | 45-2926 | 0-0.6 | 10-650 | DN350*2 | 90-450 |
| AX450D | 100 | 60-3900 | 0-0.4 | 10-650 | DN450*2 | 110-600 |
Construction
The powerful rotary lobe pump is designed and manufactured
individual to suit your application.
The electric motor is coupled directly to the cylindrical pump
shaft by means of a hollow shaft
The pump is driven by an electrical parallel shaft helical gear
motor.Upon request, the motor can be equipped with a frequency
converter.
The pump is installed on a chassis made of stainless steel Thanks
to the four solid-rubber tires the pumps very easy to move By
slightly pressing down the pushing device. The pump can be steered
very easily.
Advantages
+ 16 pump sizes with flow rates of 1–3200 m³/h
+ With and without casing protection plates and liners
+ Pumping in slurp operation
+ Resistant to solids and self-priming
+ Ease of maintenance thanks to MIP
+ Different drive options
+ Short-term dry-run capability
Testing Photo
