Accuvon rotary lobe pumps
Accuvon rotary lobe pumps convey different fluids, whether with low
or high viscosity, containing solids or pure, chemically aggressive
or up to a temperature of 200°C. Due to the large selection of
different materials, rotors and sealing systems, the pumps can be
customized.
Our pumps are available in the series of 4 series with 16 different
sizes and flow rates of 1 to 3200 m³/h – high performance with
smallest footprint.
Technical Date:
| Product Name: | PAM Powder-water mixture |
| Material: | GG25 Pump housing,NBR rotors |
| Seal Material: | SIC/NBR |
| Max. Flow: | 15-80 m3/h |
| Max.pressure: | 18 bar |
| Speed | 25~650 RPM |
| Rotor Type: | Tri lobe rotors |
| Mechanical seal: | Single mechanical seal |
| Motor power: | 2.2KW~22KW |
| Sealing option: | single mechanical seal/Double mechanical seal |
| Voltage: | 380V,50HZ |
| Motor: | XINGLING motor, WANNAN motor, others (Domestic Famous Brand) |
| connection: | Direct Flange |
| Available standard: | DIN, SMS, 3A, RJT, ISO/IDF |
| Operated: | Electric power |
| Application scope: | petrochemical industry, sewage treatment, railway vacuum discharge
system, biogas energy, food waste, ship ocean, pulp and paper, food
and drinks, light industry etc. |
Operating Principle
Rotary lobe pumps are not sensitive to dry running and are
self-priming positive displacement pumps. The synchronized rotation
of the rotor pair and the increasing suction chamber
create a vacuum on the priming side of the pump. This vacuum draws
the liquid into the pump chamber. The pumped medium is conveyed
past the pump wall into the pressure area by the
rotors. The synchronized rotation of the rotor pair and the
decreasing pressure chamber create an over pressure on the
discharge side of the pump. The flow direction can easily be
reversed by changing the direction of rotation.
Unrivaled Low Maintenance
Due to the cantilevered carrier design of the pump, the wear parts
stressed by the pumped media can be replaced through the
quick-release cover of the pump. All maintenance work can be done
without the need to remove piping and the drive system.
Outstanding Range Of Material
The correct selection of material is important for the durability
of a pump. For this reason, all components of our pumps are
available in different materials. Using a modular principle, the
most resistant material most suitable for the relevant pumped
medium is selected for each pump component, from the O-ring to the
pump casing.
Unique Block Design
Each rotary lobe pump is equipped with a non-segmented pump and
gear casing. This design reflects our high quality standard and
guarantees long service life with ease of maintenance. The pump
casing can be manufactured in cast iron, cast steel, stainless
steel, duplex steel or Hastelloy.
Variety Of Rotors
We offer a range of linear and screw rotors differentiated by
geometry and material. Whether made of NBR, EPDM, FKM, stainless
steel, steel or another material, we offer a suitable rotor for
your application.
Seal Selection
Our single- or double-acting mechanical seals are available in
different versions and materials. The seals can be replaced very
easily through the quick-release cover.
Unique Casing Protection
In order to prevent pump casing damage, e.g. due to abrasive or
aggressive fluids, Accuvon pumps are equipped with casing
protection. The unique casing liners and casing protection plates
are available in different materials.
Testing Photo
