Portable Hazardous Material Transfer Pump / Explosion-Proof /
Emergency Water Pumps
compact and powerful
Accuvon has developed a portable hazardous material transfer pump,
especially for use in areas that are difficult to access.
use in potentially explosive atmospheres
the ex-compliant rotary lobe pump is equipped with an
explosion-proof electric motor and can e.g. be operated by the
power generator of an emergency vehicle. the pump is self-priming.
additional priming aids are not necessary.
the Accuvon rotary lobe pump also pumps in slurp operation and is
suitable for cleaning up residual liquids or removing oil or
similar substances from water surfaces.
the portable pump is built in such a compact way that the pump
including the drive can be transported in the storage compartment
of an emergency vehicle, on a truck bed or in a car trunk. you can
choose between two sizes. with fkm rotors installed, the Accuvon
portable hazardous material transfer pump conveys up to 230 l/min
or 350 l/min, respectively
versatile use the portable hazardous material transfer pump has
been manufactured for the transfer of aggressive media, mineral oil
products and flammable liquids of explosion group ii a and ii b and
temperature classes t1 to t3 in potentially
explosive atmospheres of zone 1.
the pump has a wide range of applications:
| 1 | oil spill response pump |
| 2 | disaster relief pump |
| 3 | hazardous material pump |
| 4 | cleaning up and transferring |
| 5 | conveying of aggressive or highly viscous liquids or |
| 6 | media containing solids |
| 7 | conveying of flammable liquids |
| 8 | and so on |
reliability down to the last detail
| 1 | easy to operate by means of atexcompliant circuit breaker |
| 2 | power supply via an explosion-proof connecto |
| 3 | tanker truck coupling (tw) dn 50 at suction and pressure side |
| 4 | pressure monitoring at suction and pressure |
| 5 | side and temperature measurement in the pump chamber |
| 6 | space-saving storing in a storage compartment of the emergency
vehicle |
| 7 | portable thanks to its compact lightweight design – use in areas
which are difficult to |
Benefits at a glance
| 1 | Resistant to solids,short-term dry-run capability |
| 2 | Almost pulsation-free pumping |
| 3 | Self-priming up to 7 m liquid column |
| 4 | No age-related wear of the pumping elements |
| 5 | Constant flow rate even at high pressures |
| 6 | EX- explosive compliant |
| 7 | Pumping in slurp operation |
| 8 | Easy to operate |
| 9 | very easy to maintain. |
Features of Accuvon Rotary Lobe Pumps:
1.Self-priming, Valve-less, Positive Displacement Pump
2. Easy Maintenance through Front Cover
3. Controllable Flow, Ratio up to 1 : 5
4. Capacity of up to 4000 m³/h
5.Pressures of up to 25 bar
6. Dry-running Capability
7.Reversibility, same pump output for both directions
8. Gentle, Low-Pulsation Pumping
9.For Viscous, Solid, Abrasive or Shea-sensitive Mediums
10. Low Parts Replacement Costs
Components of a Accuvon Rotary Lobe Pump
1 Timing gear
2 Quench and control chamber
3 Casing in block design
4 Unwetted shaft
5 Axial and radial casing protection
6 Shaft seal
7 Rotors
8 Quick-release cover
