Self Priming Portable Hand Cart Mobile Lobe Pump With Diesel Drive
ACCUVON Mobile Lobe Pump
Unforeseen situations in which media need to be transferred
frequently arise. In such situations a hand cart pump is ideal.
Accuvon Mobile Lobe Pump is equipped with a mobile trolley and an
electric control cabinet, which is mainly used inoccasions where
the location of the site is uncertain. The electric control cabinet
can also be equipped with a frequencyconverter to adjust the pump
speed, so as to realize the flow control.
The portable mobile pump can be built in such a compact way that
the pump including the drive can be transported in a car trunk or
storage compartment of an emergency vehicle without problems.
A wide variety of materials and seals are available when
configuring the Accuvon portable pump. This way, the pump can be
used as a hazardous material pump for conveying chemically
aggressive substances for example. It can also be used in
potentially explosive atmospheres.
Specifications:
| ACCUVON | rate of flow
l/rev | flow
(m³/h) | pressure
(Mpa) | speed
rpm | Flange diameter
DN mm | power
Kw |
| AC25 | 0.196 | 0.1-7 | 0-1.2 | 10-600 | DN25 | 0.75-5.5 |
| AC50 | 0.392 | 0.2-14 | 0-1.0 | 10-600 | DN50 | 1.1-5.5 |
| AC75 | 0.588 | 0.3-21 | 0-0.6 | 10-600 | DN50 | 1.1-5.5 |
| AP80 | 1.125 | 0.6-400 | 0-1.8 | 10-600 | DN80 | 3-22 |
| AP100 | 1.875 | 1.1-66 | 0-1.4 | 10-600 | DN100 | 3-22 |
| AP120 | 2.864 | 1.7-103 | 0-1.0 | 10-600 | DN100 | 3-22 |
| AP140 | 3.714 | 2.2-133 | 0-0.6 | 10-600 | DN125 | 7.5-22 |
| AF125 | 4.566 | 2.7-164 | 0-1.6 | 10-600 | DN125 | 11-55 |
| AF150 | 6.828 | 4-246 | 0-1.2 | 10-600 | DN150 | 11-55 |
| AF200 | 9.456 | 5.5-340 | 0-0.8 | 10-600 | DN200 | 11-55 |
| AX250 | 12.5 | 7.5-487 | 0-2.5 | 10-650 | DN250 | 22-315 |
| AX300 | 25 | 15-975 | 0-1.0 | 10-650 | DN300 | 30-315 |
| AX350 | 37.5 | 22.5-1463 | 0-0.6 | 10-650 | DN350 | 45-315 |
| AX450 | 50 | 30-1950 | 0-0.4 | 10-650 | DN450 | 55-315 |
| AX350D | 75 | 45-2926 | 0-0.6 | 10-650 | DN350*2 | 90-450 |
| AX450D | 100 | 60-3900 | 0-0.4 | 10-650 | DN450*2 | 110-600 |
Note: Above flange is regular for each model, besides we also offer
various flange connection according to your requirements
1. Tested medium in the table: water.
2. Speed, flow rate, electrical power and pressure will be
according to different liquid properties.
3. Port size can be changed as needed.
4. ACCUVON reserves the right to change specifications without
prior notification.
Selection:
ACCUVON offers a wide material variety. The pump casings are
available from cast iron up to duplex-stainless steel, the casing
protection plates provide materials up to ceramic and the rotors
include a wide range of geometries and materials (elastomer coated,
PUR, PTFE up to stainless steel).
Different needs require different materials and dimensional
features.
The wide range of different materials for rotors, make it possible
to configure and build the perfect ACCUVON Rotary Lobe Pump for
each application.
Rotor types
Different forms of rotor design meets the diverse needs of users,
and the materials of the rotor are also diverse, such as NBR
rubber, EPDM rubber, FPM rubber, FFKM rubber, PU, Stainless steel,
copper, PTFE, etc.
Advantage
• Low shear/Pulse free operation
• Excellent for oil/water and high viscosity liquid.
• Ability to pump at constant pressure at different flow rates
• Self-priming to 9.5 meters
• Forward and reverse pumping operation
• Space-saving compact design
• 10 to 1 turn down capability and reverse capability
• Run dry ability for a period of time
Quality inspection photos
