Hand Cart Lobe Pump / Self-Priming / Viscous Or Abrasive Media
In many sectors, it is important to be able to use a pump in a
flexible way. Hand cart pumps are ideally suited for this purpose.
They can be pushed very easily to different application sites
without any additional auxiliary means and are ready for use right
away.
Due to its compact and low-on space design, the Accuvon rotary lobe
pump is the ideal hand cart pump. Accuvon makes every hand cart
pump in line with the customer's wishes and requirements.
Whether on two or four wheels, in ATEX design, whether with control
technology or frequency converter, with the wide range of equipment
and additional parts, Accuvon is able to build rotary lobe pumps
optimally suited for almost any application.
Rotors made of different materials, pump casings made of gray cast
iron, steel casting or stainless steel, mechanical seals made of
many different material combinations only give an idea of the wide
variety of materials of Accuvon rotary lobe pumps. Various rotor
types based on different materials (elastomers, plastics or metal)
can be used, depending on the pumped medium.
Liquid as well as viscous or abrasive pumped media can be conveyed
effortlessly, and even solids and chemically aggressive substances
pose no problem.
Unique
• 16 sizes
• Flow rates of up to 4000 m³/h
• Different sealing systems
• Rotor variety
• Material variety
• Quick filling and emptying
High quality
• Durable
• Robust
• Self-priming
• Compact
• Short-term dry-runcapability
• Ease of maintenance
Versatile
• Chemically resistant
• Resistant to solids
• For highly viscous media
• Pressure-resistant
• Reversible
• For abrasive media
• ATEX-compliant
• Compact and can be used in a flexible way.
Accuvon Mobile quality configured individually for your application
requirements.
| accuvon | rate of flow
l/rev | flow
(m³/h) | pressure
(Mpa) | speed
rpm | Flange diameter
DN mm | power
Kw |
| AC25 | 0.196 | 0.1-7 | 0-1.2 | 10-600 | DN25 | 0.75-5.5 |
| AC50 | 0.392 | 0.2-14 | 0-1.0 | 10-600 | DN50 | 1.1-5.5 |
| AC75 | 0.588 | 0.3-21 | 0-0.6 | 10-600 | DN50 | 1.1-5.5 |
| AP80 | 1.125 | 0.6-400 | 0-1.8 | 10-600 | DN80 | 3-22 |
| AP100 | 1.875 | 1.1-66 | 0-1.4 | 10-600 | DN100 | 3-22 |
| AP120 | 2.864 | 1.7-103 | 0-1.0 | 10-600 | DN100 | 3-22 |
| AP140 | 3.714 | 2.2-133 | 0-0.6 | 10-600 | DN125 | 7.5-22 |
| AF125 | 4.566 | 2.7-164 | 0-1.6 | 10-600 | DN125 | 11-55 |
| AF150 | 6.828 | 4-246 | 0-1.2 | 10-600 | DN150 | 11-55 |
| AF200 | 9.456 | 5.5-340 | 0-0.8 | 10-600 | DN200 | 11-55 |
| AX250 | 12.5 | 7.5-487 | 0-2.5 | 10-650 | DN250 | 22-315 |
| AX300 | 25 | 15-975 | 0-1.0 | 10-650 | DN300 | 30-315 |
| AX350 | 37.5 | 22.5-1463 | 0-0.6 | 10-650 | DN350 | 45-315 |
| AX450 | 50 | 30-1950 | 0-0.4 | 10-650 | DN450 | 55-315 |
| AX350D | 75 | 45-2926 | 0-0.6 | 10-650 | DN350*2 | 90-450 |
| AX450D | 100 | 60-3900 | 0-0.4 | 10-650 | DN450*2 | 110-600 |
Features of Accuvon Rotary Lobe Pumps:
1.Self-priming, Valve-less, Positive Displacement Pump
2. Easy Maintenance through Front Cover
3. Controllable Flow, Ratio up to 1 : 5
4. Capacity of up to 3200 m³/h
5.Pressures of up to 25 bar
6. Dry-running Capability
7.Reversibility, same pump output for both directions
8. Gentle, Low-Pulsation Pumping
9.For Viscous, Solid, Abrasive or Shea-sensitive Mediums
10. Low Parts Replacement Costs
Components of a Accuvon Rotary Lobe Pump
1 Timing gear
2 Quench and control chamber
3 Casing in block design
4 Unwetted shaft
5 Axial and radial casing protection
6 Shaft seal
7 Rotors
8 Quick-release cover
