Mobile Diesel Pump For Oil Refineries Chemical Plants Flooded Areas
Versatile and powerful
Accuvon mobile units are used for a wide variety of pumping tasks.
Whether in oil refineries, chemical plants, sewer rehabilitation or
flooded areas – all mobile units have one thing in common: they are
manufactured specifically for their respective areas of
application.
From the trailer and the pump technology to the control technology
– all Accuvon mobile pumps are planned, designed and produced by a
single source.
The experience from building several thousands of mobile units is
reflected in each mobile pump.
Options
Each Accuvon mobile pump is built in line with our customers'
wishes and requirements.
Please find a small selection of options here.
Depending on the customer's requirements mobile units can be
mounted onto a trailer or a steel construction with forklift
pockets. Crane lugs permit their use as roll-off containers or
transportation by helicopter.
Mobile units are often equipped with a tarp / roof bow
construction. With foldable versions, the tarp can be used as
weather protection. If protection against vandalism is required,
the pump can be protected by a foldable protective grid.
| 1 | While other drive types are also available, mobile units are
usually driven by a combustion motor in order for them to be used
as standalone units. |
| 2 | The combustion motor or the entire unit can be equipped with a
sound enclosure for use in residential areas. |
| 3 | The pump can be equipped with control technology "Made by Accuvon"
upon request. |
| 4 | When conveying solids-laden media, it may be advisable to use a
macerator. |
| 5 | Depending on the customer's requirements, the mobile unit is fitted
with storage compartments for hoses or other equipment. |
Benefits
Made for mobile use
The customized construction and excellent pumping properties of
Accuvon rotary lobe pumps make Accuvon mobile units an ideal mobile
solution for virtually any pumping task.
Benefits at a glance
| suitable for standalone use | Driven by a combustion motor, our mobile pumps are suitable for
standalone use in virtually any situation. |
| powerful Flow rates of up to 4000 m³/h | |
| high-quality control technology | The control technology is individually adapted to the fields of
application and customers' requirements. |
| constant flow rate, even in high-pressure situations | Even in high-pressure situations (e.g. due to long pumping
distances), the flow rate of Accuvon rotary lobe pumps remains
constant. |
| resistant to solids, self-priming and capable of running dry for a
short time | These capabilities make the pumps suitable for universal use. |
| ready for use right away | The pumps are ready for use right away − connect the hoses and
start the drive. |
| customized design | Each mobile unit is configured and built individually. |
| user-friendly | The pumps are very easy to operate. |
| very easy to maintain | The pump can be maintained within a few minutes at any given
location. |
Accuvon is a specialist for rotary lobe pumps. We offer 16 pump
sizes with flow rates of 1 –4,000 m³/h and a large selection of
equipment and additional parts. The large-scale geometry and short
passage enable the medium to be pumped gently.
Features of Accuvon Rotary Lobe Pumps:
1.Self-priming, Valve-less, Positive Displacement Pump
2. Easy Maintenance through Front Cover
3. Controllable Flow, Ratio up to 1 : 5
4. Capacity of up to 4000 m³/h
5.Pressures of up to 25 bar
6. Dry-running Capability
7.Reversibility, same pump output for both directions
8. Gentle, Low-Pulsation Pumping
9.For Viscous, Solid, Abrasive or Shea-sensitive Mediums
10. Low Parts Replacement Costs
Components of a Accuvon Rotary Lobe Pump
1 Timing gear
2 Quench and control chamber
3 Casing in block design
4 Unwetted shaft
5 Axial and radial casing protection
6 Shaft seal
7 Rotors
8 Quick-release cover
