Wear-Resistant / Non-Clogging Lobe Pump For Fruit And Vegetable
Waste
Accuvon lobe pump for Fruit and Vegetable Waste
Vegetable processing, especially with potatoes and tomatoes, has an
increasing need for reliable solids handling pumps that are capable
of pumping starchy, thick slurries with a percentage of solids.
Vegetable waste often includes seeds, skins, pulp and other fibrous
material that can cause significant problems in pumps in the form
of clogging and quickly wearing down pump parts. When these issues
start to happen regularly to the installed pumps, significant
downtime is likely and it’s a position no company wants to find
themselves in. Therefore, investing in the right kind of pump from
the onset will eliminate this problem from occurring, saving your
countless hours of production time. This waste needs to be removed
and disposed of quickly, efficiently, and in a cost-effective way.
For this situation, Accuvon lobe pump can solve perfectly thanks to
they are large and direct inlet opening gives highly viscous media
and stiff,clumpy elements direct access to the displacement
chamber.The medium flows a short distance through the pump chamber,
thus ensuring gentle pumping. With fibrous media or media with a
tendency to clump, clogging or coiling is nearly impossible.
Specifications:
| ACCUVON | rate of flow
l/rev | flow
(m³/h) | pressure
(Mpa) | speed
rpm | Flange diameter
DN mm | power
Kw |
| AC25 | 0.196 | 0.1-7 | 0-1.2 | 10-600 | DN25 | 0.75-5.5 |
| AC50 | 0.392 | 0.2-14 | 0-1.0 | 10-600 | DN50 | 1.1-5.5 |
| AC75 | 0.588 | 0.3-21 | 0-0.6 | 10-600 | DN50 | 1.1-5.5 |
| AP80 | 1.125 | 0.6-400 | 0-1.8 | 10-600 | DN80 | 3-22 |
| AP100 | 1.875 | 1.1-66 | 0-1.4 | 10-600 | DN100 | 3-22 |
| AP120 | 2.864 | 1.7-103 | 0-1.0 | 10-600 | DN100 | 3-22 |
| AP140 | 3.714 | 2.2-133 | 0-0.6 | 10-600 | DN125 | 7.5-22 |
| AF125 | 4.566 | 2.7-164 | 0-1.6 | 10-600 | DN125 | 11-55 |
| AF150 | 6.828 | 4-246 | 0-1.2 | 10-600 | DN150 | 11-55 |
| AF200 | 9.456 | 5.5-340 | 0-0.8 | 10-600 | DN200 | 11-55 |
| AX250 | 12.5 | 7.5-487 | 0-2.5 | 10-650 | DN250 | 22-315 |
| AX300 | 25 | 15-975 | 0-1.0 | 10-650 | DN300 | 30-315 |
| AX350 | 37.5 | 22.5-1463 | 0-0.6 | 10-650 | DN350 | 45-315 |
| AX450 | 50 | 30-1950 | 0-0.4 | 10-650 | DN450 | 55-315 |
| AX350D | 75 | 45-2926 | 0-0.6 | 10-650 | DN350*2 | 90-450 |
| AX450D | 100 | 60-3900 | 0-0.4 | 10-650 | DN450*2 | 110-600 |
Note: Above flange is regular for each model, besides we also offer
various flange connection according to your requirements
1. Tested medium in the table: water.
2. Speed, flow rate, electrical power and pressure will be
according to different liquid properties.
3. Port size can be changed as needed.
4. ACCUVON reserves the right to change specifications without
prior notification.
Advantage
- Low energy consumption
- Simplified maintenance
- Reasonable spare parts
- Screwed rotor allows for low-pulse operation
- MIP-Design with radial casing liners
- Allows reversal of the flow direction – in any operating state – by
simply changing the direction of rotation.
- Long durability
- No clogging and no tangle.
Working Principle
Lobe pump is self-priming, valveless positive displacement pump.
Through the two parallel shafts in the synchronous gear to driven
the rotor synchronous operation, chamber form a vacuum between the
rotor vanes and casting surrounding, so that the medium was
inhaled, then displaced through the discharge-side. Pump operating
direction can be reversed by changing the direction of rotor
rotation, to be a two-way pump for reversing operation.
Quality inspection photos
