Good Suction Property / Low Costs For Wearing Parts Of Lobe Pump
The Working principle of ACCUVON Rotary Lobe Pump
The two rotors divide the rotor chamber into several smaller rooms
and move in order as: A-b-c-d. At position a, only room filled with
medium; At position b, some medium is closed in room B; At position
C, some medium is also closed in room A, and at position d, room A
and B are connected with room II; Here the medium is delivered to
the outlet. With this circulation, the medium (material) is
delivered through the pump continuously.
The Components of ACCUVON Rotary Lobe Pump
1. Bearing and timing gear
2. Intermediate chamber
3. Casing in Block design
4. Axial and radial casing liners
5. Shaft seals
6. Rotary Lobes / Rotors
7. Quick-release-cover
8. Non-wetted shafts
Specifications:
| Description | Rotary Lobe Pumps |
| Rotor | tri-lobe with plastic-coated |
| Seal | Multiseal for latex - based products / mechanical seal |
| Axial and radial casing protection | hard metal |
| Drive | Parallel geared electric motor |
| Material of pump | Full off Stainless steel |
| Gear | Helical geared motor |
| Flow | 4-246 m³/ h |
| Custom printing | Acceptable |
Parameter of AF 150
| Drive | Weight | Dimensions |
| KW | KG | L / mm | H / mm |
| 5.5 | 473 | 1518 | 548 |
| 7.5 | 485 | 1578 | 548 |
| 11 | 526 | 1638 | 604 |
| 15 | 590 | 1683 | 604 |
| 18.5 | 604 | 1828 | 654 |
| 22 | 692 | 1878 | 654 |
| .30 | 725 | 1938 | 69 |
Design 1 | Short, straight pipe connectors with connection flange
and gasket, in mm / inches approx.
| AP 150 | DN 100 / mm | DN 125 / mm | DN 150 / mm | DN 200 / mm | DN 250 / mm |
| DIN 2633 | 206 / 760 | 201 / 750 | 176 / 700 | 151 / 650 | 251 / 850 |
| ANSI 150 | | 232 / 812 | 232 / 812 | 191 / 730 | 301 / 950 |
Advantages
Low costs for wearing parts, as the rotating lobes or the rotor
tips can be exchanged easily and for reasonable costs.
Also the wear-plates and the simple mechanical seals are very cost
saving.
Good suction property, but depended from the pump speed.
Easier installation of pump-systems, through the suction property
Stainless steel rotors are available for all pumps, and some models
offer rotors from PTFE.
FAQ:
Q: How can I make order ?
A: Contact us and tell us your requirements, and then we will send
quotation as your request.After finished payment, we will arrange
shipping for you.
Q: Which payments are acceptable?
A: T/T, L/C, Western Union, Paypal
Q: Which shipping terms are available?
A: By sea, air, Express
Q: How about the delivery time?
A: It is normally 5-10 working days after payment, Depends on your
quantity.
Q: What guarantee do you have?
A: The product warranty period is 2 years, except for wearing parts
(if the product fails to work normally due to poor manufacturing,
the company will replace and repair products and parts for users
free of charge. Product damage caused by human causes is not
covered by the warranty.
Q: Can I purchase parts separately?
A: Yes, all pump spare parts can be purchased separately.
Photo Display
