High load capacity and long service life for Rotary lobe pump


ACCUVON Rotary Lobe Pump

Rotary Lobe Pumps are self-priming, valve less, positive displacement pumps. With speed-proportional flow, they continuously deliver trouble-free pumping of liquids of various consistencies and multiphase mixtures. They are compact and operate with low shear and low pulsation.


Specifications:

Parameter of AX 300

Design 1 | Short, straight pipe connectors with connection flange and gasket, in mm / inches approx.

Function :

1. Bearing and Timing Gear
The timing gear is in a separately sealed construction element. The high quality and robustly
designed gear wheel ensure a precise transmission and long service life.
2. Intermediate Chamber
The fluid-filled and separately-sealed intermediate chamber divides the timing gear from the
wetted pump chamber. It protects the gear from penetration of conveying liquid and the pump chamber from contact with gear oil. It is also the seal quench.
3. BLOCK-Pump casing
The wetted pump casing is made from a single BLOCK-casing with low tolerances. It is available from high quality gray cast iron, ductile iron or stainless steel. A quick release cover fitted with just four ring nuts closes the casing. This allows an easy and quick access to the inner parts of the pump.
4. Axial and radial casing protection liners
Axial casing protection liners are fitted as standard at both face ends of the wetted pump casing. The liners are made from hard metal, hardened steel or specially treated stainless steel. The front side clamped in liner between the casing face and the quick release cover as well as the screwed-in rear plate is easily accessible because of the quick release cover.
5. Shaft Seals
Unlike a lot of other positive displacement pumps, Rotary Lobe Pumps have got single acting mechanical seals with quench as standard.
6. Rotors
The rotors are adopted to each individual application. Beside different
metals there are different elastomers, plastics or special materials available. The building kit system ensures that almost all rotors can be retro fitted to previously supplied pumps.
7. Quick Release Cover
The robust design of Rotary Lobe Pumps with one side bearings as a matter of principle allows the quick release cover with the best access possible to all parts being wetted and subject to wear. All of these parts can be easily inspected and simply be replaced if needed.
8. Non-wetted Shafts
The conveying product because of the special self-sealing design does not wet the carrying shafts of Rotary Lobe Pumps.


Advantages Lobe Pumps

• Low energy consumption
• Simplified maintenance
• Reasonable spare parts
• lScrewed rotor allows for low - pulse operation
• MIP - Design with radial casing liners

Quality inspection photos

FAQ:

Q: How can I make order ?
A: Contact us and tell us your requirements, and then we will send quotation as your request.After finished payment, we will arrange shipping for you.

Q: Which payments are acceptable?
A: T/T, L/C, Western Union, Paypal

Q: Which shipping terms are available?
A: By sea, air, Express

Q: How about the delivery time?
A: It is normally 5-10 working days after payment, Depends on your quantity.

Q: What guarantee do you have?
A: The product warranty period is 1 years, except for wearing parts (if the product fails to work normally due to poor manufacturing, the company will replace and repair products and parts for users free of charge. Product damage caused by human causes is not covered by the warranty.

Q: Can I purchase parts separately?
A: Yes, all pump spare parts can be purchased separately.

Accuvon (Guangzhou) Pumps Co., Ltd. is a Sino-German joint venture established in 2008. It specializes in design, development, manufacturing, sales, engineering applications and technical services for rotor pumps. In accordance with the German DN industrial standards and technical requirements , licensed manufacturing and sales of ACCUVON brand rotary lobe pump in China.

In the past fifteen years, ACCUVON has focused on the field of rotary lobe pumps, and is committed to providing customers with professional technical support and perfect solutions. More than a thousand projects have been implemented, with partners from all walks of life in China.Besides, some products have been exported to South Asia and the Middle East. With high-quality , advanced technology and service , it has won the trust and first choice of the industry. Up to now, the company has applied for 50+ patents, an obtained quality management system certificate S09001, environmental management system certificate S014001, occupational health and safety management system certificate OHSAS18001, high-tech enterprise certificate, high-tech product certificate (5 items) etc.

The technologies of ACCUVON pumps are mainly used in petrochemical industry, sewage treatment, railway vacuum discharge system, biogas energy, food waste, ship ocean, pulp and paper, light industry etc.