High Self-Priming And Handles Pressures Up To 12 Bar For Rotary
Lobe Pump
ACCUVON Rotary Lobe Pump
ACCUVON Rotary Lobe Pump provides high-efficiency fluid transfer,
maximizing uptime while minimizing contamination risks and
maintenance costs. Its low-pulsation, low-shear pumping action
transfers media of varying viscosities with ease. Modular design
provides great flexibility to tailor a pump to meet specific
process requirements.
The Components of the ACCUVON Rotary Lobe Pump
1. Bearing and timing gear
2. Intermediate chamber
3. Casing in Block design
4. Axial and radial casing liners
5. Shaft seals
6. Rotary Lobes / Rotors
7. Quick-release-cover
8. Non-wetted shafts
Specifications:
| Description | Rotary Lobe Pumps |
| Rotor | FFKM / tri-lobe with detachable lobe tips |
| Seal | Single-acting mechanical / mechanical seal |
| Axial and radial casing protection | Wear-resistant steel |
| Drive | Flame - proof motors |
| Material of pump | Stainless steel |
| Gear | Helical geared motor |
| Flow | 2.2 - 133 m³/ h |
| Custom printing | Acceptable |
Parameter of AP 140
| Drive | Weight | Dimensions |
| KW | KG | L / mm | H / mm |
| 2.2 | 190 | 1150 | 414 |
| 3 | 205 | 1150 | 414 |
| 4 | 220 | 1176 | 426 |
| 5.5 | 230 | 1233 | 426 |
| 7.5 | 275 | 1295 | 453 |
| 9.2 | 295 | 1295 | 453 |
| 11 | 305 | 1420 | 453 |
| 15 | 335 | 1467 | 481 |
Design 1 | Short, straight pipe connectors with connection flange
and gasket, in mm / inches approx.
| AP 140 | DN 80 / mm | DN 100 / mm | DN 125 / mm |
| DIN 2633 | 221 / 700 | 186 / 630 | 191 / 640 |
Advantages
Starting Torque Low, as all rotating elements are guided in
anti-friction bearings. Star-Delta-Start is possible with
three-phase-motors.
Pressures up to 12 bar as rotary-lobe-pumps are single stage in
general. Special systems go up to 18 bar. The possible pressure is
also limited due to the radial forces at the non drive end of the
shafts and their deflection resulting from it.
Little floor space, as being built very compact in Block-design.
Suction- and pressure pipes in one line, so inline-assembly is
possible without elbows in the pipeworks. Little required space for
service. No removable parts in the pipeworks required. Any nominal
flange diameter can be realised as the flanges are separately
bolted to the pump body. Especially floor space saving is the
jacked up drive design with V-belt between drive and pump.
FAQ:
Q: How can I make order ?
A: Contact us and tell us your requirements, and then we will send
quotation as your request.After finished payment, we will arrange
shipping for you.
Q: Do you have MOQ limit?
A: The MOQ is 1 set.
Q: Which payments are acceptable?
A: T/T, L/C, Western Union, Paypal
Q: Which shipping terms are available?
A: By sea, air, Express
Q: How about the delivery time?
A: Delivery time is normally 3-7 working days after confirm the
money. Depends on your quantity.
Q: What guarantee do you have?
A: The product warranty period is 2 years, except for wearing parts
(if the product fails to work normally due to poor manufacturing,
the company will replace and repair products and parts for users
free of charge. Product damage caused by human causes is not
covered by the warranty.
Q: Can I purchase parts separately?
A: Yes, all pump spare parts can be purchased separately.
Photo Display
