High Performance And Low Noise Cheese / Yogurt Transport Lobe Pump
Brief introduction :
Yogurt has high requirements on the hygiene level of the pump
during the transportation process. Accuvon yogurt pump, the rotor
has high processing precision, small clearance, and less material
backflow during the conveying process; with the new two-lobe rotor,
low speed, it will not cause secondary shearing of the material to
cause demulsification, which better ensures the material of
original characteristics make the product taste better. Besides,the
pump has obtained 3A and FDA certification in the United States,
and supports online CIP and SIP.
Specifications:
| ACCUVON | rate of flow
l/rev | flow
(m³/h) | pressure
(Mpa) | speed
rpm | Flange diameter
DN mm | power
Kw |
| AC25 | 0.196 | 0.1-7 | 0-1.2 | 10-600 | DN25 | 0.75-5.5 |
| AC50 | 0.392 | 0.2-14 | 0-1.0 | 10-600 | DN50 | 1.1-5.5 |
| AC75 | 0.588 | 0.3-21 | 0-0.6 | 10-600 | DN50 | 1.1-5.5 |
| AP80 | 1.125 | 0.6-400 | 0-1.8 | 10-600 | DN80 | 3-22 |
| AP100 | 1.875 | 1.1-66 | 0-1.4 | 10-600 | DN100 | 3-22 |
| AP120 | 2.864 | 1.7-103 | 0-1.0 | 10-600 | DN100 | 3-22 |
| AP140 | 3.714 | 2.2-133 | 0-0.6 | 10-600 | DN125 | 7.5-22 |
| AF125 | 4.566 | 2.7-164 | 0-1.6 | 10-600 | DN125 | 11-55 |
| AF150 | 6.828 | 4-246 | 0-1.2 | 10-600 | DN150 | 11-55 |
| AF200 | 9.456 | 5.5-340 | 0-0.8 | 10-600 | DN200 | 11-55 |
| AX250 | 12.5 | 7.5-487 | 0-2.5 | 10-650 | DN250 | 22-315 |
| AX300 | 25 | 15-975 | 0-1.0 | 10-650 | DN300 | 30-315 |
| AX350 | 37.5 | 22.5-1463 | 0-0.6 | 10-650 | DN350 | 45-315 |
| AX450 | 50 | 30-1950 | 0-0.4 | 10-650 | DN450 | 55-315 |
| AX350D | 75 | 45-2926 | 0-0.6 | 10-650 | DN350*2 | 90-450 |
| AX450D | 100 | 60-3900 | 0-0.4 | 10-650 | DN450*2 | 110-600 |
Note: Above flange is regular for each model, besides we also offer
various flange connection according to your requirements
1. Tested medium in the table: water.
2. Speed, flow rate, electrical power and pressure will be
according to different liquid properties.
3. Port size can be changed as needed.
4. ACCUVON reserves the right to change specifications without
prior notification.
Selection:
ACCUVON offers a wide material variety. The pump casings are
available from cast iron up to duplex-stainless steel, the casing
protection plates provide materials up to ceramic and the rotors
include a wide range of geometries and materials (elastomer coated,
PUR, PTFE up to stainless steel).
Different needs require different materials and dimensional
features.
The wide range of different materials for rotors, make it possible
to configure and build the perfect ACCUVON Rotary Lobe Pump for
each application.
Advantages Lobe Pumps
- High degree of operational safety due to double-acting mechanical
seals
- Short-term dry-run capability
- Self-priming
- Short-term dry-run capability
- Steel rotors with screw profile for low pulsation
- ATEX - compliant design
- Ease of maintenance with MIP / Maintenance in Place
- Heated pump chamber due to pump heater cover
- Pumping of highly viscous media
Working Principle of Rotary Lobe Pump:
The rotary lobe pumps we also called them lobe rotor pumps. They
are one popular transfer pump to conveying the food, beverage, pulp
and paper, chemical, pharmaceutical and so on. The rotor lobe pump
relies on two synchronously rotating rotors that generate suction
(vacuum) at the inlet during the rotation. Thereby sucking in the
material to be conveyed. Both rotors split the rotor chamber into
different spaces. Then operate in the order of 1-2-3-4. The medium
is delivered to the discharge port. In this cycle, the medium
(material) is continuously transported out by the source.
Quality inspection photos
